Water jet cutting services coimbatore- How do waterjet work

Water jet is flexible, fast, precise and in last few yrs have become user-friendly and easy to use. Water jet machining is attained via forcing large volume of water with high-pressure via small orifice in nozzle. The steam of water leaves nozzle impact part and begins cutting process. Kerf from accelerated tributary of water is very narrow.  This high-pressure is then determined in small area on material that begins to erode material. Water jet cutting services can be ideal way to cut any materials. Soft materials can be slice with water pressure and hard materials can be cut using abrasive with waterjet like metal cutting. Read out here to know how to use water jet cutting services.

How do water jet work?

Take normal water and high-pressurize it upto 60,000 psi and force it in a very tiny hole. Mix water with garnet-abrasive and you have small stream of water travelling speed that can quickly erode most materials. Some water jet are pure water jet and don’t add garnet abrasive which can be used to cut soft materials like foam, food and rubber.

Suggested : How to cut metal with water jet cutting coimbatore

What can water jets cut?

Water jet can slice any type of materials. The most fame materials are metals (mainly aluminium, as it’s relatively soft and slice rapidly), since water jet can cut complex shape to high-precision rapidly and economically. Water jet also commonly cut glass and stone, since the water jet can obtain complex shapes not possible utilizing traditional machining techniques. 

Advantages of Water Jet Cutting

• Cold cutting – no hardening, no-heat affected zones
• Cuts virtually any material
• Reduces dust and dangerous gases
• Eco-friendly
• Flexible machine integration
• Quicker than many conventional cutting tools
• Perforates lot of materials without starting holes
• Saves raw materials 

 To know more about water jet cutting services coimbatore visit here.

Read More

Glass water jet cutting services - Acquire waterjet cutting services coimbatore

Water jet cutting is ideal solution to every glass-cutting challenge. It provides fast cuts on glass to 6” thickness. Glass cutting is best application for water jet cutting services. Without using any tooling or set-up changes you can leave from cutting most tantalizing led-light glass, via strongest 100mm -6” thickness laminated bullet-resistant glass. Exact cutting stream enables water jet cutting of almost any kind of shape, it doesn’t matter how fine or complex, with almost no-load from cutting method being used to glass, then as long as you can hold it, Water jet can cut it. Read out below given post to know about how glass water jet cutting services work.

Water jet cutting services for glass

 

Cutting Glass with Waterjet

Cutting and stabbing glass is not a trouble with waterjet cutting tools. From cutting of complex stained glass, to sharp holes in glass, to simply cutting laminated ballistic-glass, customers from diversity of industries have revealed the cost-effectiveness and versatility of cutting glass-materials with water jet cutting technology.

Recommended : water jet cutting coimbatore on glass
 

The Best Edge

Whole drilling is simple for water jet technology, since is stained glass cutting on the other end of band.  There is no necessitating engraving and breaking while cutting glass with water jets, thus there is less gaunt material no program pattern restriction. Water jet allows you to cut even the faintest glass without cracking or producing a crater. Water jet cutting doesn’t vibrate the glass, there is no leave behind rough edges or heat-affected zone (HAZ) and almost no secondary processing is required. 

Glass water jet cutting applications contain

1. Inlays
2. Shower doors and walls
3. Mirrors
4. Wall inlay
5. Tabletop inlay
6. Flooring inlay
7. Stained glass
8. Light fixtures
9. Windows
10. Ornament
11. Unique backsplashes

Benefits of cutting glass using waterjet cutting

• Create complex design in any size and shape
• Cut glass geometry which common machining can’t perform
• Precisely cut thin to thickness glass exclusive of changing any tooling
• Delicate glass doesn’t crack through processing
• No heat-affected zone (HAZ)
• No tool to sharpen
• Eliminates strain of cutting process in surface material
• No wastage of material, narrow cutting-gap
• Cost-effective means of cutting holes on glass
• No or reduced require for reworking the cut edge

These are the various benefits of cutting glass using water jet cutter. So, if you are the looking to cut glass to make ideal shape then, you must prefer water jet cutting services Coimbatore.

Read More

Obtaining water jet cutting services Coimbatore | Kerala | Karnataka

As one among the fastest growing machine tool industries in market is none other than the water jet cutting technology. It has proven to save money and time on countless applications like stone and metal cutting. Water jet cutting coimbatore technology is often utilized while manufacturing machine-parts. This is known to be preferred technique when materials being cut are highly sensitive to high-temp generated via other techniques. Water jet cutting is utilized in different industries like ship building, job shop applications and aerospace for cutting different materials.

Note: see recommended water jet cutting services Coimbatore.

Look on benefits of using water jet cutting services

Whether it’s cutting titanium, sheet metal, marble, steel or granite – water jet cutting is the right answer for you.

Water Jet cutting on materials

Accuracy	Average of ±0.003″ (±0.08 mm) and up to 0.001” (±25 μ) 1
Process	Cold Supersonic abrasive used to cut material
Thickness	3″ (75mm) or more for some applications
Material Limitation	Works in virtually all type of materials except really hard ceramics
Heat affected zone(haz)	None
Material distortion	No Distortion
Cutting speed	5-10 times faster than EDM while thickness is under 1″
Setup	Fast and easy set-up

Water jet cutting enables

1.     Wide range of materials

2.     Rapid programming

3.     Fast set-up

4.     Quality finish with minimal deburring

5.     No thermal distortion

6.     Rapid processing speeds

7.     Cut complex shapes

 

Water jet cutting

Parameter	Water Jet
Edge Burning	No
Metals	Yes
Non Metals	Yes
Hardened Materials	Yes
Blind Cutting	Good
Edge Finish	Good
Thickness mm (ss/ Titanium)	0.5- 150
Composites	Yes
Burr on edge	No
Edge Taper on higher thickness	Good
Thermal Effects	No

Have a look at the benefits of water jet cutting services that are

Tolerances

Tolerances tighter than +/- 0.005" are attainable, mainly in thin materials like1" stainless steel is attained. Though, high-tolerances come with cost, sometimes equal to 500% higher-than if same part had been assigned with tolerance of +/- 0.015". Waterjet cutting has capability to differ tolerances in diverse locations on a part, makes sure the best quality and pricing.

Thickness and Kerf

Water jet can cut materials ranging from 10" stainless steel - 0.010" acrylics, making it versatile tool. Kerf ranges from 0.020" - 0.050".

Taper and Edge Finish

Edge and taper finish are directly linked to cut-speed. Quicker speed means more-taper and coarser edge-finish.  Dawdling down, Water jet taper will be removed and finish of 120 attained.

No Heat-Affected Zone (HAZ)

It is natural-erosion method involving no heat or chemicals. Due to this, warping and deformation naturally associated with laser, oxy-fuel and plasma cutting is eliminated, thus minimizing requires for secondary processing.

Nesting And Common Line Cutting

Contrasting laser, oxy-fuel and plasma cutting, Waterjet adds itself to general line cutting. Water jet provides optional state-of-the-art nesting-software, allowing you to nest numerous shapes together and slice them with numerous heads. Tracking of leftovers and nesting in to these odd-shapes later, assists save valuable material and can add towards reducing the operating costs.

I hope, you are clear about why should pick water jet cutting services also you can look out here to attain water jet cutting services coimbatore.

Read More

Water jet cutting services Coimbatore - Find the best

Water jet cutting is one among the best technology used by many industries across the world. It offers way of saving costly materials and using them to best based on your ability. It offers you the capability to cut numerous pieces from one part of material. No more waste as with water jet cutting, minimal waster can be created. It is used in different industries such as mining and aerospace for shaping, cutting and reaming. In this article, you can know details of Waterjet cutting benefits and how to hire best water jet cutting services Coimbatore.

Benefits of water jet cutting services

Water jet cutting coimbatore system will perfectly complement the existing cutting solution or yet replace it to some extent. Since, water jet machines are not only convincing when comes to make final products also in making of work pieces. Compared to other techniques, water jet cutting method shows lot of benefits that are

1. No restriction in strength – stainless-steel with thickness of adequate to 280-mm can be cut, based on the ability of high-pressure pump
2.  The water jet can be utilized to slice heat-sensitive materials such as rubber, plastic or composite materials, and also stone, glass and very hard ceramics.
3. Additional veering heads can be readily bonded for expanded production.
4.  No problems with shiny materials like aluminium and brass
5. Very simple material change: only cutting speed is customized; neither optics nor gas have to be replaced
6. Programming through standard CNC-software
7. The distance between material and nozzle is not as decisive as with other cutting techniques.
8. No heat-influence and thus no change and no burning in material structure ensuing from the heat

Know types of materials to be cut by water jet cutting technology

1. Composites
2. Hylem
3. Titanium
4. Grass
5. Alloys
6. Plastic
7. Stone
8. Marble, Tiles, Ceramic
9. Nylon
10. Granite
11. Foam
12. Stainless Steel and Other Highly-Reflective Materials
13. Tool Steel
14. Rubber
15. Food

Why water jet cutting services should hire?

Many technologies are there to cut various materials however; water jet cutting is known to be best technology to choose it. It can be used to slice any type of materials to acquire precise parts. Main benefit of this technology is eco-friendly and do not produce heat which is a cold cutting process. So, now the thing is where to acquire services? Well, have a look at here gkindus.com to obtain ideal water jet cutting services in Coimbatore.

Read More